 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
ACOUSTIC SHEET & ROLL GOODS |
|
 |
 |
CLICK ON IMAGES BELOW TO |
CLICK ON IMAGES BELOW TO |
CLICK ON IMAGES BELOW TO |
 |
 |
 |
Conasorb F - Flexible polyurethane foam absorber material. |
Barymat 5 - Thin flexible, plain foam noise barrier material. |
Barymat BM-1C - Flexible barrier with polyester cover and foam decoupler composite material. |
Conasorb F is a flexible polyester polyurethane foam specifically formulated to absorb airborne and random incidence noise, utilizing minium weight and thickness. Conasorb F reduces airborne sound energy in the frequency range found in most environments. |
Barymat 5 is a thin, dense, plain noise barrier material available in 1.0 lb.. and 2 lb.. per sq.. ft.. weights (0.5 lb. also available). This flexible, mineral filled sheeting can be applied alone or in combination with other acoustic products where high transmission loss is required. | Barymat BM-1C is an extremely versatile noise control composite. It consists of (from top down) a clear, tough polyester cover for contamination and weather (inc'l UV) resistance, a loaded, flexible, 1.6 lb.. per sq.. ft.. barrier for transmission loss and a .25 urethane foam decoupler. |
| COMMON USES: • ENCLOSURE LINER • ACOUSTIC BAFFLES • SILENCER LINER |
COMMON USES: • WALLS • FLOORS • CEILINGS • ACOUSTIC WRAPS |
COMMON USES: • PIPE/DUCT WRAP • LAGGING MACHINERY HOUSING |
 |
|
|
CLICK ON IMAGES BELOW TO |
CLICK ON IMAGES BELOW TO |
CLICK ON IMAGES BELOW TO |
 |
 |
 |
Conasorb UF - Polyurethane foam absorber with a black urethane film cover. |
AcoustiGuard RB - A flexible, loaded barrier material reinforced with a fibre glass scrim. |
Barymat BV-14C - A Noise Barrier / absorption material with a perforated vinyl cover and foam decoupler. |
Conasorb UF is a combination of 1.5 mil urethane film bonded to polyester polyurethane acoustic foam. The black urethane film finish is extremely durable due to its highly elastic properties and is resistant to mechanical damage. This finish is suitable for very dirty environments and will withstand direct contact with water and most fluids found in industrial environments such as oil and cutting fluids. |
AcoustiGuard RB is a 'loaded' PVC with a fibre glass scrim center making it an extremely durable and highly flexible acoustic barrier. It is very easy to work with and readily accepts fittings such as grommets and or Velcro, making it an excellent choice for curtain or acoustic over-wrap. The surface is easy to clean and contamination resistant, allowing it to be used nearly in an environment. |
Barymat BV-14C is a composite noise barrier / absorption material protected with a perforated vinyl film facing. The composite consists of (from top down) perforated vinyl for scruff, wear and contamination resistance, 1.0 inch of acoustic polyurethans foam for sound absorption, a filled, flexible 1.6 lb.. per sq. ft. barrier for transmission loss and a .25 inch polyurethane foam decoupler layer. |
COMMON USES: |
COMMON USES: |
COMMON USES: |
|
|
|
| CLICK ON IMAGES BELOW TO DOWNLOAD PRINTABLE DATA SHEETS |
CLICK ON IMAGES BELOW TO DOWNLOAD PRINTABLE DATA SHEETS |
CLICK ON IMAGES BELOW TO DOWNLOAD PRINTABLE DATA SHEETS |
 |
 |
 |
Conasorb V is a combination of a perforated vinyl film bonded to a polyester foam. The perforated vinyl film provides a scruff and wear resistant surface that is suitable for dusty or moderately dirty environments where it is not exposed to contaminants such as direct oil or water spray. |
FTMM has a surface of silver, metalized polyester film bonded to a flexible polyester polyurethane acoustic foam specifically formulated to absorb airborne, random incidence noise. The cleanable film offers a high degree of contamination resistance especially where it could be contacted by direct oil or water spray. |
AcoustiGuard ML is a rigid mineral liner board with a mat black non-woven glass cover. |
COMMON USES: |
COMMON USES: |
COMMON USES: |
|
||
For More Information Email: Info@wilrep.com |
||
 |
||
Studio Foam" like Convo F is primarily used to control reverberation and internal room acoustics in recording studios, voice over booths and control rooms. Because it is light weight, easily cut and installed it make this studio foam the perfect choice for your recording studio project. Convo F is a polyurethane foam with a sculpted surface that effectively reduces reverberation, echo and standing waves. It's unique surface pattern is matching and seamless when installed. With a NRC of .70-1.05 Convo F is a powerful sound absorber. |
||
COMMON USES: |
WILREP LTD
email: info@wilrep.com
Tel: (905)625-8944 Fax:(905)625-7142
Toll Free: 1-888-625-8944